Pumps of Bulgaria - enterprise VIPOM JSC -

12.01.2010 Dear partners! We remind you that is is necessary to renew the Certificates of the Dealer for the year 2010 (see contacts).

24.11.2009

We are now offering the type KEM cantilever-monoblock pumps which are manufactured at our plant. These pumps are intended for mineral oils with viscosity of up to 120 cSt, pure water and liquids that have properties similar to water in viscosity and chemical activity, have no mechanical impurities, and those temperature does not exceed +140°C. The driving wheel of these pumps is made of bronze. The unary face seal is enclosed.

10.11.2009

We accept orders for manufacturing one- and two-level pumps of diagonal type DT for repumping waters from reservoirs , rivers and industrial zone. The hydraulic part incorporates with basic knee by way of separate trumpet sections with intermediate shaft that allows to reach various building height.

If you are interested in purchasing these types of pumps please fill in the questionnaire.

12.10.2009

International Technical Fair 2009 (Plovdiv)

Vipom AD participated in the International Technical Fair 2009 which was held from September 28 to October 3 in Plovdiv. Despite the economical crisis that affected 2/3 of the Bulgarian businesses, more than 2 thousand domestic and international companies demonstrated their innovative products and technological developments at the Fair.
Vipom AD presented its products in the open area of the machine building sector. This year the machine building sector attracted the greatest number of the prestigious exhibiting companies and was most popular among the visitors. The Fair gave numerous opportunities for the exhibitors and the visitors to hold business meetings and establish useful contacts with current and future clients.
(photo).

28.07.2009

We take orders for pumps E-type, designed to transfer chemically active liquids (liquid end made of steel Х18Н10ТСЛ) (contacts).

07.07.2009

Vipom AD accepts orders from the outside organizations on carrying out of tests of the pump equipment.

We are taking orders for the production of the type DV single-stage vertical pumps with a double-end liquid feed. These pumps are very compact and, therefore, can be used at small-sized pumping facilities (see technical characteristics).

16.06.2009

The Certificate ISO was prolonged.

08.06.2009 "Vipom"AD expands its dealership network on the territory of Russia and the Former Soviet Union Republics (see representations).

20.04.2009

"Vipom" AD is now taking orders from other companies to test their pump equipment and define the actual parameters of each pump in real operating conditions (photo). Testing is carried out in the laboratory which is accredited according to BDS EN ISO/IEC 17025:2006. Please contact our office for more information (see contacts).

16.03.2009 We are taking orders for the production of the type MTR multi-stage section pumps. These pumps are intended for transit cold and hot water, oil and mineral oil. At will of the customer pumps can be completed by face seal.
In comparison to other pumps, these particular pumps consume less electrical power, thus they are more effective economically (see technical characteristics).

03.03.2009

We are now offering the type KEM cantilever-monoblock pumps which are manufactured at our plant. These pumps are intended for mineral oils with viscosity of up to 120 cSt, pure water and liquids that have properties similar to water in viscosity and chemical activity, have no mechanical impurities, and those temperature does not exceed +140°C. The driving wheel of these pumps is made of bronze. The unary face seal is enclosed.

03.02.2009 Dear partners! We remind you that is is necessary to renew the Certificates of the Dealer for the year 2009 (see contacts).

20.01.2009

On January 7, 2009 Mr. Pol Malok Makuej, the Ambassador of the Republic of Sudan, who was accompanied by the first Secretary of the Sudanese Embassy, Mr. Salih Musa Eiza Musa, has made an informal visit to "Vipom"AD.
The visitors were interested in the nomenclature of the manufacturable products and examined the production capabilities of "Vipom"AD. Thereafter, they met with the plant administration and discussed the possibilities of an increase in quantity of orders and deliveries of pumps and pumping equipment to the Republic of Sudan.

15.01.2009 The complete catalogue of the spare parts for the type D pumps is posted here. Please refer to it to make a competent choice of the necessary equipment.

08.12.2008 We accept orders for manufacturing one — and two-level pumps of diagonal type DT for repumping waters from reservoirs , rivers and industrial zone. The hydraulic part incorporates with basic knee by way of separate trumpet sections with intermediate shaft that allows to reach various building height.

31.10.2008 The picture story from an exhibition «PCVEXPO-2008» (Russia, Moscow).

14.10.2008 From October 21 to October 24, 2008 «Vipom» AD together with their partners «Rosgidromash» (Russia) will take part in the 7^th International Forum «PCVEXPO-2008» which will take place in IEC "Crocus-Expo", Moscow region, Krasnogorsky district, 66 km of MKAD (outer side).

You can see the new joint working out of "Vipom" AD (Bulgaria), "Rosgidromash" JSC and the Company «Industrial power machines» (Russia) at our stand (pavilion 3, a hall 13, stand D1686). This is diesel pump installation. The diesel pump installations data are already widely used in the industry and building for pumping water from foundation ditches, tranches at fire fighting, for making a powerful pressure and water delivery from a source or capacity, in agriculture at irrigation.

Also, there will be presented diffrent types of face seals made by «Nikom-65» (Bulgaria).

You can recieve detailed cosultations of leading experts of manufactures.

15.09.2008 Since October, 8-10th "Vipom" JSC (Russia) take part in an exhibition "The Russian industry is for the Fuel and Energy Complex of the North-2008", Surgut. This exhibition is organized with the support of administration of Novosibirsk, administration of the Siberian Federal District, administration of Surgut and the territorial production enterprise of Surgut.

25.08.2008 Since September, 16-19th "Vipom" JSC (Russia) take part in an exhibition , Tyumen. This exhibition is organized with the support of Administration of the Tyumen Region and will take place at exhibition centre , Sevastopolskaya 12, Tyumen.

24.07.2008 From July, 07th till July, 14th the representatives of "Vipom" AD together with their partners from the Russian "Rosgidromash-Center" JSC took part in a seminar which was held in Varna, Bulgaria on the grounds of "NIKOM-65", the largest producer of end seals. This seninar devoted to analysis of innovative development of face condensation and the subsequent introduction in manufacture of new technologies.

01.07.2008 "Vipom"AD expands a network of the dealers in territory of Russia and the CIS countries (representations).

16.06.2008 We offer cantilever-monoblock pumps of type KEM, made by Vipom AD (Bulgaria). Pumps are intended for handling mineral oils of viscosity up to 120 cSt, pure water and liquids without machanical impurity that have properties similar to water of viscosity and chemical activity, which temperature does not exceed +140°C. The driving wheel is made of bronze. Unary face seal is also enclosed.

26.05.2008

The Sanitary-and-epidemiologic decision on pumps of "D" ("VD") type made by Vipom AD, Bulgaria, confirming application of pumps in the centralised systems of drinking water supply (certificate) is recieved.

05.05.2008 Since April, 23-25rd the Moscow representation of a factory - "Vipom"JSC - took part in an exhibition "Metallurgy. Mining. The equipment and modern technologies - Norilsk - 2008". This exposition was spent at support of Administration of Norilsk and "GMK "Norilsk nickel" ZF JSC. During an exhibition there were many interesting meetings with the engineering personnel of the enterprises. The pumping equipment of manufacture "Vipom"AD is maintained by these corporates and also they are interested in new development of a factory.

17.04.2008 We take orders for manufacturing of one-stage vertical pumps with a bilaterial supply of a liquid of type DV, which compact design allows to maintain them at small pump stations (characteristics).

31.03.2008 We take orders for pumps E-type, designed to transfer chemically active liquids (liquid end made of steel Х18Н10ТСЛ) (contacts).

03.03.2008 We accept orders for manufacturing of pumps of type "D" with a flowing part from stainless steel (contacts).

13.02.2008 We accept orders for manufacturing of multistage section pumps of type MTR. These pumps are intended for transit cold and hot water, oil and mineral oil. At will of the customer pumps can be completed by face seal.
Economic benefit of useage of these pumps in comparison with their analogues is reached due to reduction of the electric power consumed by pumps (characteristics).

29.01.2008 "Vipom"AD expands a network of the dealers (representations). Concerning the conclusion of dealer contracts for 2008 we ask to address here.

15.01.2008 "Vipom" AD accepts orders from the outside organizations on carrying out of tests of the pump equipment. Tests are spent in conditions of the laboratory, accredited according to BDS EN ISO/IEC 17025:2006. That will allow to define actual parameters of each pump at real operating conditions (photo). Concerning to address (contacts).

14.11.2007
      "VIPOM" - one of the oldest mechanical-engineering companies in Vidin, Bulgaria - celebrated its 60 year anniversary on November 2, 2007. The highlight of the celebration was the concert of a popular Bulgarian singer Jordanka Christova.
      The present and the past "VIPOM" employees, the main stockholders, as well as the officials and other guests were invited to the celebration. During his speech, the executive director congratulated everyone with the anniversary, extented thanks to the present and past employees for their dedication and hard work over such a long period of time.
      The Vidin region governor K. Spasov also congratulated the guests and pointed out the important role that "VIPOM" has been playing in the development of the Vidin region economy.
       The celebration of the anniversary concluded in the restaurant "Bononia" famous for its comfortable and pleasurable atmosphere. (photo)

06.11.2007 From October 15 to October 18, 2007 the 6th International Forum PCVEXPO, which was organized by the International exhibition company, was held in CEC Sokolniki. VIPOM AD together with its russian partner ZAO ROSGIDROMASH presented the most popular models of the pumping equipment. The stand of the company attracted attention of the partners and the prospective clients. (photo)

10.10.2007 In August and September "Vipom" AD participated in the following exhibitions:

30.08-09.09 - the traditional Vidin Panair
24.09-29.09 - the International Technical Panair in Provdiv

The main theme of the "Vipom" AD stands at both exhibitions was the company's celebration of its 60-year anniversary.

The International Technical Panair in Provdiv gathered more than 3000 companies-participants from all over the world. The "Vipom" AD stand attracted many interested visitors and clients. Among the most popular pumps were the type "D" pumps (they were of interest to the specialists from the African Republic of Malawi), the horizontal single-stage and multiple-stage pumps, and the marine pumps. (photo)

10.09.2007From Sep. 26 to Sep. 28 an exhibition "Pipelines. Pipeline equipment. Pumps" will be held at the expocenter "ERG" in Kazan, the republic of Tatarstan. The Vipom JDC Moscow office will be presenting the well-known and the newly-developed products at the stand C 5/4.

The expocenter is located at the following address: Kazan, Moskovskaya st., 1 GU

27.08.2007Just recently the representatives of "Vipom" JSC together with their partners from the Russian "Rosgidromash" JSC took part in a seminar which was held in Varna, Bulgaria on the grounds of "NIKOM-65", the largest producer of end seals.
The seminar concluded with a number of important agreements on mutually beneficial cooperation with the most successful manufactures of the hydraulic equipment. (photo)

01.08.2007 The Vipom AD testing laboratory has been working successfully over the past few years. The laboratory is there to carefully check each pump which is produced at the plant. Customer satisfaction is important to us, and that is why our customers receive only that equipment which had passed all the necessary tests for suitability. (photo)

09.07.2007 At the beginning of the year 2007 the sludge pumps 50SH and 50SH40 produced by "Vipom" (Bulgaria), which are the analogues of the Russian pumps 6SH8-2, were offered to the Russian consumers. The first run of these pumps was brought into operation in March. The producing plant has received favorable reports about the operation of these pumps. The customers of the new run of the updated pumps will appreciate the efficiency of the equipment.

21.05.2007 May 16 to 18 this year "Vipom"AD together with ZAO "Rosgidromash" (Russia) took part in the eighth specialized exhibition - congress "Oil. Gas. Geology - 2007" in Tomsk. At the opening day of the exhibition the governor of Tomsk region Mr. Kress visited the exposition of "Vipom" and "Rosgidromash". In discussion with the governor the perspectives of cooperation of oil-well experts of Tomsk region with the enterprise "Vipom" were considered. (see foto-report)

24.04.2007 On 16-18.05.2007 the company "Rosgidromash" will present the pumping equipment produced by "Vipom" AD at the 8th Specialized Exhibition-Congress "Oil. Gas. Geology - 2007" in Tomsk, Russia. The presented equipment is used for pumping water, polluted liquids, oil and oil products.

02.04.2007 We offer submersible electric pumps produced by "VIPOM"AD.

Advantages in comparison with Russian analogues:

- the pumping units meet the requirements of international standards and European safety standards;
- technical characteristics and power indices (efficiency and g-sort cosφ) are analogous to the leading European manufacturers. The result of the exploitation of the mentioned pumping units is energy saving;
- only high quality materials (winding wire, bearings etc.) of leading European manufacturers are used in pump production;
- the pumping units are characterized by durability, which provides low exploitation expenses;
- sixteen months' guarantee;
- the production of pumps is certified as meeting the requirements of ISO 9001:2000.

12.03.2007 We accept orders for manufacture and supply of pumps type "D(VD)" for pumping water up to +140°C (contacts).

16.02.2007 We accept orders for delivery of pumps type "D" for transferring sea water (material completion of flowing part - bronze, stainless steel) (contacts).

30.01.2007 "VIPOM" AD has its own laboratory for hydraulic tests. The laboratory got accreditation on the grounds of the standards BDS EN ISO/IES 17025: 2006, and has accreditation certificate N119 LI given by Bulgarian accreditation service.

The laboratory can carry out tests of the following equipment:

1. Pumps for handling liquids and creating vacuum in installations with parameters: flow rate - from 0,1 to 300 l/s, head - from 0,1 to 600 m, vacuum - from 1 to 600 mmHg, power - from 0,1 to 130 kW

2. Submersible electric motors with parameters: power - from 0,1 to 130 kW, voltage - from 1 to 450 V~, frequency - from 10 to 60, current strength - from 0,2 to 400 A

The results of the tests are certified by appropriate documents.

15.01.2007 We offer the products of our plant for conducting tests to corroborate claimed parameters of our equipment.

05.12.2006 We offer pumps type SH, FSH, FVE, FVK, FS, FH, FKS for pumping sewage and other polluted liquids. (for details)

13.11.2006 We offer cantilever pumps E and KEM - type by "VIPOM" production intended for pumping water, oil products and chemically active liquids (at greater length see the table of comparison with more known analogues)

12.10.2006 From the 2nd to the 5th of October "Vipom"JSC took part in the fifth international forum PCVEXPO'2006 - "PUMPS, COMPRESSORS, VALVES" in Moscow. Bulgarian cantilever pumps for pumping water and chemically active fluids were widely represented at the exhibition (see photo-report)

14.07.2006 The audit has taken place on "Vipom" AD to witness the conformity of the equipment to the System of Quality Control according the International Standard EN ISO 9001:2000 adopted on the plant from the august 1997. As the result - the Certificate ISO was prolonged upto 2009.

28.06.2006 Please mind that the e-mail address of our office in Sofia has been changed: sofia@vipom.ru; sofia@vipom.com

09.06.2006 "VIPOM" AD received the Certificate of Quality of RF on centrifugal sectional pumps CNS(N)-500 and CNS(G)-850 types

29.05.2006 "Vipom" JSC is reporting that a bonded warehouse has been opened by "Rosgidromash" JSC -the official dealer in Russia Product realization to the non-resident companies of the Russian Federation directly from the bonded warehouse, without preliminary customs clearance charge that is provided by legislation of the Russian Federation, lets the companies get the equipment on more advantageous terms.

15.05.2006 The eleventh international exhibition "NEFTEGAZ 2006" will take place in the Exhibition complex "Ekspocenter"JSC, Krasnaya Presnya, Moscow, from 19 to 23 June, 2006. "VIPOM"JSC together with the company "Rosgidromash" will present new technical equipment for oil production, oil refining and oil transportation.

11.01.2006 Information about the pumps type DV is extended. Now you have an opportunity to find out more about techincal charcteristics, overall and mouning dimensions for the whole range of this pump type.

28.11.2005 From the 22nd to the 25th of November "Rosgidromash"JSC took part in the fourth international forum PCVEXPO'2005 - "PUMPS, COMPRESSORS, VALVES ".
Already well-known at the Russian market pumps produced by "Vipom"AD (Bulgaria) such as pumps types D, MTR, E, E-KUL, three-screw pumps HVP (including vertical execution) for transferring oil products were exhibited at the forum. Besides, the visitors of our stand were for the first time introduced to centrifugal vertical single-stage pumps type DV. Overall dimensions of these pumps allow to reduce construction dimensions of the pumping stations. (photo)

07.09.2005 JSC "Rosgidromash" jointly with "Vipom" AD takes part in the Exhibition "Oil and Gas. FEC" (20-23 September 2005) in Tyumen and on the 27th-30th of September 2005 in "Oil and Gas - 2005" in Surgut.
Different types of pumps for handling water, oil and oil products together with the new projects and pump models will be represented there.

15.08.2005 Pump type 500D140 has been put into series production. The pump has two modifications for cold and hot water.

28.06.2005   In the course of negotiations with SAER ELETTROPOMPE (Italy) an agreement has been reached on marketing development of the company's production in cooperation with Vipom AD and its dealer system.
   Among the SAER ELETTROPOMPE products there are vortex, cradle-mounted, chemical, drainage, submersible and other types of pumps (http://www.saerelettropompe.com).
   On the question of purchase please contact.

23.05.2005
		On May 09-13, 2005 Vipom AD took part in International Fair of Technics and Technical Achievements, Belgrade.(photo). We would like to thank all the participants and guests who showed a keen interest in our production. We hope that this meeting will help us develop beneficial partnership relations.

19.04.2005 The Second International Trade Exhibition for Rebuilding of Iraq was held in the beginning of April, in Amman, Jordan. The main focus of the fair was to bring together buyers, suppliers and manufacturers in order to ensure rehabiltation of Iraq's infrastructure after the military conflict. Vipom AD took part in the exhibition together with other eight Bulgarian companies and presented the products already well-known at the Iraqi market and its recent developments.

21.01.2005 Dealer system for year 2005 is being formed.
On the question of dealer contract conclusion please click here.

22.12.2004 Vipom AD has mastered manufacture of axial-flow and mixed-flow pumps with capacity up to 7200m³/h and head up to 50m. For details go ... .
If you are interested in purchasing these types of pumps please fill in the questionnaire.

18.11.2004 The range of double-entry pumps type DV has been expanded.
We accept offers for manufacturing pumps type 300DV70 (in detail).

20.10.2004 One of the recent developments of Vipom JSC is a pump type 6EP15 designed for transferring contaminated liquids with mechanical impurities up to 5 mm. Due to the wide operative range (flow range: 0-40m³/h, head range: 19-8 m), pumps are used in various conditions, for example: in emergency situations, floods, sewage pits, mines, at the construction sites.
Advantages:
1. Depending on the operating conditions and upon customer's request pumps can be manufactured of different materials: impeller - steel, bronze or plastic, shaft - stainless steel.
2. Compactability and small weight make the usage easy and convenient.
3. In comparison to other analogues, pumps are coupled with electric motors of lower power.
4. Quality of pump is guaranteed by the ISO 9001 : 2000 certificate.

14.09.2004 International technical fair will take place from 27th of September till 2th of October 2004 in the city of Plovdiv, Bulgaria.
We invite you to visit our exhibition stand XIII-42.

18.08.2004 We accept orders for manufacturing stainless D type pumps designed for chemically active fluids.

12.07.2004 Vipom JSC has developed a new construction of bore-hole submersible pumps. These pumps provide long-term operation and are characterized by increased reliability and better maintenance ability.

15.06.2004 The new improved model of pumps 550D50 preserved its weight and overall dimensions. Due to its new hydraulic system the pump ensures the wider range of values: head pressure and supply, higher NPSH-level and efficiency optimization. That results in saving of consumed power. The improved construction of bearing knots leads to the long-term operation of pumping equipment.

05.06.2004
		"Vipom" took part in the opening of a new network "Agropark" with demonstrating its new range of high efficiency mobile diesel-engine pump units. (photo) The great interest of farmers and agronomists of Bulgaria to these manufactured articles proved the actuality of application of mobile pump units in the modern agriculture.

17.05.2004 Tomorrow the 12th international specialized exhibition of oil and gas equipment "Gas. Oil. - 2004" will be opened in the city of Ufa.
Vipom JSC will present there its new pump models designed for pumping oil products and aggressive liquids.

23.04.2004 In April of this year Vipom JSC made an agreement with the leading heat power plants of Bulgaria. It concerned service maintenance of the equipment and supply of spare parts for pumps installed on these plants. It was preceded by the field presentations of Vipom new type of production at some power complex plants such as the heat power plant of Varna, the heat power plant of Devnja and others. The new types of KEM pumps for hot water were introduced during the presentations. The outdated pumps will be soon replaced.

31.03.2004 We offer the supply of multi-stage sectional pumps type MTR (analogs of pumps type CNS) produced by Vipom, Bulgaria. The pumps are designed for transfrerring hot and cold water as well as oil products. The quality of the pumps is confirmed by the international certificate ISO9001/2000.
In the majority of cases the pumps are complete with electric motors of capacity lower than that of the analogs, while the important parameters remain the same.
The economic effect due to the decrease of power consumption allows to repay the cost of the pumping unit at the earliest possible date.(technical characteristics)

11.03.2004 A long-term supply contract is negotiated between Vipom JSC and local authority of Havana. The first 300 pumps are already manufactured and ready for shipment.

01.03.2004 We accept orders on supplying pumping units c/w variable speed drives.
For information please contact the Moscow representative office of Vipom JSC by phones (095) 143-89-68, 937-95-25 , e-mail: m@vipom.ru

16.02.2004
		The official representative of Vipom JSC in Ukraine, Trading House "Glavmash", began its work: Trading House "Glavmash" Gudanova street 9/11, fl. 1, Kharkov, Ukraine Phone/fax: +38 (0572) 585-593, 585-594 Mobile phone +38 (050)343-42-41, 323-30-69


03.02.2004
		D type double-entry vertical pumps are put into production at Vipom JSC(click here for additional information) We accept orders on manufacturing these types of pumps.

15.01.2004 Vipom JSC plans to expand its dealer network in Russia and CIS countries. Click here for contact information about dealer agreements and contracts.

20.11.2003 The impellers designed for suction-tube dredges LIU-4, LIU-5 are put into production at Vipom JSC.
On request, the impellers can be produced of gray cast iron, high-duty cast iron, wear-resistant steel.


28.10.2003
		At the present time "Vipom"JSC has started the pilot project. It aims at supplying the farms of Bulgaria with drip irrigation systems. (For details see the catalogue(338kb))


10.10.2003
		A week ago Vipom JSC presented its production at the International technical fair in Plovdiv. The weather was mild and sunny during the fair. More than 3 thousand of guests visited the stand. Among them there was the vice-premier of Bulgaria, Mrs Shuleva. The presentation of the new series of the diesel-driven pumps took place. They were developed together with the leader of the Bulgarian motor industry "Vamo". The order for 200 pieces of diesel-driven motor pumps for one of the African countries was secured.(photo)

30.09.2003 Various pump units with diesel engines are put into production at "Vipom" JSC, which alows to use them in the regions devoid of power supply. The quality of the driven motors comply with the Europian ecological norms. (for details see description and technical parameters)

22.09.2003 In October 2003 actuation of a new induction furnace, produced in Germany, is expected. The 5 tons capacity of the induction furnace will broaden the list of produced alloys and therefore increase the range of products.

22.09.2003 "Vipom"JSC opens a new representative office in Serbia. Its coordinates soon will be availiable on our Web site.

15.09.2003 The new type KMM single-phase mono-block pump, which is designed for transferring hot water, was tested. The quality and the characteristics of the pump comply with the European standards. The first lot of pumps has already been put into production (for details see description and technical parameters).

15.09.2003 The new laboratory, produced by ARL company (Austria), for chemical analyses of metals and alloys composition joined into force.

12.09.2003 In April 2003 "Vipom"JSC was officially registered in the United Nations database as a major supplier of pump equipment for water services and irrigation of Near East and African countries.

09.09.2003 59th International technical fair will take place from 29th of September till 4th of October 2003 in the city of Plovdiv, Bulgaria. We welcome all our partners and companies and look forward to develop business relations. We invite you to visit our exhibition stand in the pavilion N9, place XIII-44.