Vipom's pumps pumpsChemical Pumps
pumps
Chemical Pumps
    Pumping units, designed for transportation of aggressive liquids with mechanical admixtures, containing particles not larger than 0,2 mm. at concentration up to 1000 mg/1 and temperature not higher than 80°C.
    Flow-head range - 1,5 - 350 1/s, and maximum head - 470 m.w.c, covered by 50 size types of "E", "KUL", "MTR" and "D" pumps with frequency of rotation: 1470 min-1, 2900 min-1.
    Centrifugal pumps. Flange fixing dimensions, corresponding to BDS 3277-84.
    Depending on clients' order, the pumps can be coupled with el. Motors for different voltage, frequency, class of insulation - explosion- or gas-proof.
    The pumps are tested and approved in compliance with ISO 2548 class "C" for water with temperature 20°C.
    The details in contact with the transported liquid, are manufactured from chrome or chrome-nickel steels as per table.
AGGRESSIVE
MEDIUM
StandardMATERIAL - CHROME-NICKEL STEEL
BDSХ18Н10ТСЛОХ17Н13М2ТОХ23Н28М3Д3Т
GOST12Х18Н9ТЛ08Х17Н13М2Т01Х23Н28М3Д3Т
DINX12CrNiTi189X6CrNiM0Ti17122-
BS321S51320S18-
AISI321H316Ti-
NITRIC ACID AND ITS SALTSResistant at K<80%
T<70°С
-Resistant
SULPHUR ACID AND ITS SALTSНNot-resistant in acid..
Resistant in salt solutions.
Resistant at K<40%
T<70°С
Resistant
PHOSPHORIC ACIDResistant при K<60%Resistant-
HYDROCHLORIC ACID AND ITS SALTSNot-resistant in acid.
Resistant in salt solutions.
-Resistant at K<30%
T<60°С
SULPHUROUS ACID-Resistant-
ORGANIC ACIDSResistant at room temperatureResistantResistant
ALKALIResistantResistantResistant
NOTES:
    1. K - concentration
    2. T - temperamre (Tmax=80°C)
    3. If there is cavitation and abrasives, the chemical resistance reduces sharply.
Copyright © 2002-2010 rgm1.ru&vipom.com
(+359 94) 609 025, (+359 94) 609 020, (+359 2) 971 56 71, (+3592) 971 56 72, (+7 499) 143 89 68, (+7 4862) 45 86 56, (+7 4862) 45 41 60,vipom@vipom.com